- Robert E. Petersen Collection
- Ancient Firearms - 1350 to 1700
- Road to American Liberty - 1700 to 1780
- A Prospering New Republic - 1780 to 1860
- A Nation Asunder - 1861 to 1865
- The American West - 1850 to 1900
- Innovation, Oddities and Competition
- Theodore Roosevelt and Elegant Arms - 1880s to 1920s
- World War I and Firearms Innovation
- WWII, Korea, Vietnam and Beyond - 1940 to Present
- For the Fun of It
- Modern Firearms - 1950 to Present
- Hollywood Guns
U.S. M2 Selective Fire Carbine w/ flash hider
The M2 Carbine is a selective fire version of the M1 featuring a selector switch located on the left side of the receiver which allowed either semi-or fully-automatic fire. Although produced too late to see much action during the Second World War, M2 Carbines were used extensively during the Korean War and in the early stages of the war in Vietnam.
During the Second World War, some soldiers perfomed modifications to their M1 Carbines to make them capable of fully automatic fire. The Army's Ordnance Department, Springfield Armory, Inland, and Winchester also worked on manufacturing a selective fire version of the M1 Carbine. Designated the "Carbine Cal .30 M2", this arm was officially adopted in late 1944 and began to come off production lines at Inland and Winchester in May 1945.
Although the M2 entered production too late to see much use during the Second World War, these guns were widely used during the Korean War and in the early stages of the war in Vietnam. The M2 features a selector switch located on the left side of the receiver which allow either semi-or fully-automatic fire, a curved 30-round magazine, and a stock with a heavier fore end than that previously produced for the M1 Carbine.
In addition to original Inland and Winchester production, modification kits were produced that permitted M1 Carbines to be converted to M2s as part of the government's arsenal rebuilding and refurbishing program. After the outbreak of the Second World War, U.S. Ordnance officers realized the likelihood that the United States would eventually become embroiled in the conflict. As attacks spearheaded by airborne and armored units replaced the static trench fighting of the previous war, it was all too apparent to these same officers that communications, supply, and other rear echelon soldiers could suddenly find themselves under attack by crack front-line enemy troops.
The Army also realized the need for a new semi-automatic personal defense arm that would be more effective than traditional sidearms but smaller than a full-size battle rifle. Specifications for the new rifle were issued; among these was the requirement that its weight not exceed five pounds. In addition, the successful design was to have an effective range of 300 yards with the new Winchester .30 carbine caliber cartridge, which would be fed from a detachable box magazine. In May 1941, several test models were submitted for evaluation by various firms and individual designers.
Among those represented were M1 rifle inventor John Garand of Springfield Armory, Eugene Reising of Harrington & Richardson, whose submachine gun would later serve with U.S. Marines in the Pacific, L. H. Hoover of Auto Ordnance, manufacturers of the Thompson submachine gun, and Val Browning, son of John Browning, whose design was submitted by Colt. Winchester had also been working with a design for a gas-operated semi-automatic rifle, but the company's involvement with M1 Garand production prevented it from meeting the deadline for submissions.
Two designs were dropped outright because they failed to meet the Army's specifications, and the six remaining prototypes were evaluated at Aberdeen Proving Grounds in June. Although worthy of consideration, none of these initial submissions completely met the Army's expectations, and another test was scheduled for September. Encouraged by Ordnance officials, Winchester modified its experimental rifle to meet the Army's specifications.
In less than two weeks, Winchester engineers and designers put together a crude hand-made model based on a scaled-down Garand receiver and the short-stroke gas system invented by David M. Williams. The Army was favorably impressed with this design, but with less than six weeks before the second round of tests, the New Haven firm faced the daunting task of producing an operational prototype "light rifle" prior to the new deadline. Winchester accomplished this nearly-impossible feat, and when the smoke cleared, the company's entry emerged as the winner by unanimous decision of the testing officers.
Designated as the "Carbine, Caliber .30 M1," this design had gone from design to hand-built prototype to adoption by the Army in only a few months. The Navy and Marine Corps followed suit in selecting the new rifle for use by sailors and "Devil Dogs." Less than a month before the Japanese attack on Pearl Harbor, Winchester received a contract for 350,000 carbines. Winchester also agreed to authorize contract M1 carbine production on a royalty-free basis, and in turn, the government paid the company $886,000 as reimbursement for development costs.
After the U.S. joined the war against the Axis powers, the government subcontracted production of the M1 carbine. Ten primary contractors, including Winchester, I.B.M., and General Motors, assembled and delivered finished arms. These contractors also produced some of the required parts, but most of these were turned out by subcontractors. Production and allocation of parts was directed by a government-run "Carbine Industry Integration Committee," which ensured against both potential shortages and overproduction.
During its production history, several modifications were made to the initial design to improve performance or to speed production. Included were changes in the bolt, barrel band, stock, safety, magazine catch, and rear sight. Flash hiders, grenade launchers, and a bayonet mount were also available for use with the carbine as the war reached its conclusion. Standard production carbines were equipped with a full walnut stock, but a folding metal stock version, designated the M1A1, was also produced for airborne operations.
Other variants include the T3, which was capable of mounting infrared night vision scopes, and the M2 selective fire carbine. Originally supplied with a 15-round magazine, the M1 carbine was also able to use the later 30-round magazines produced for the M2. Over 6 million carbines had been manufactured by 1945, making it the most widely-produced military arm in U.S. history.
Most of these were turned out by companies having no previous experience in firearms manufacture. These arms saw service in every theater of war, serving not only with support troops and in rear areas, but also with front-line Army infantry and airborne units, and with the Marine Corps in the Pacific. Although sometimes criticized for lacking the range and power of the M1 Garand rifle and its .30-Ô06 caliber cartridge, the M1 carbine outperformed the pistol and even the submachine gun, especially at longer ranges.
After the war, many carbines came home with their "owners" in barracks bags and sea bags as souvenirs of service abroad. Those remaining in military inventories were refurbished at government arsenals and placed into storage. Although the M1 carbine production lines were closed in 1945, spare barrels were produced after the war. Unlike the .30-Ô06 ammunition used in the M1 rifle, .30 caliber carbine ammunition was non-corrosive, which eliminated the need for an extensive carbine re-barreling program.
Nonetheless, some carbines did receive new barrels as part of the post-war overhaul. The M1 and M2 carbines saw action with U.S. troops in Korea, and even though they had been officially replaced by the M14 in 1957, some were still in service through the early stages of the war in Vietnam. Several million surplus military carbines were also provided to U.S. allies throughout Asia, including the armed forces of the Philippines, South Korea, and South Vietnam.
Approximately 250,000 carbines were sold publicly through the Director of Civilian Marksmanship program during the 1960s, while others were destroyed by the government during that period. Commercially-produced copies were also available from Plainfield, Iver Johnson, and Universal, as well as from sources overseas. The M1 carbine did not replace the M1 Garand service rifle, but it was never intended to. Instead, it provided officers, airborne troops, and those serving in rear areas with a lightweight but effective offensive arm. The production figures for the carbine testify to its effectiveness in combat.