The Galleries
- Robert E. Petersen Collection
- Ancient Firearms
- The Road to American Liberty
- Seeds of Greatness
- The Prospering New Republic
- A Nation Asunder
- The American West
- Innovation, Oddities and Competition
- Theodore Roosevelt, Elegant Arms
- World War I and Firearms Innovation
- WWII, Korea, Vietnam and Beyond
- For the Fun of It
- Firearms Traditions for Today
- William B. Ruger Special Exhibits
- Freedom's Doorway
C. Sharps Arms Model 1875 Falling Block Rifle
The original side-hammer Model 1875 Sharps was an experimental rifle that never went into production. This rifle is a reproduction of that breechloading rifle design, simplified to utilize modern manufacturing techniques. SN 0-150
Christian Sharps (1811-1874) was the originator of a line of
sturdy, practical and popular military and sporting rifles and
handguns that were associated with several events that shaped
American history in 19th century, including armed conflict in
Kansas during the 1850s, the Civil War, the era of the Plains
buffalo hunter, and the rise of modern long-range competition
shooting during the 1870s.
Sharps worked at John Hall's Rifle Works in Harpers Ferry,
Virginia, where he learned the principles of arms manufacturing.
His first breechloading rifle design was patented in 1848, and the
toggle-linking trigger guard and vertically operating sliding wedge
breechblock of later Sharps rifles and carbines date from that
patent. These features are still with us today and have seen use in
both rifle and artillery breech mechanisms. The spring
lever-toggle-breech mechanism of the Borchardt-Luger semi-automatic
pistol also had its roots in Christian Sharps' lever-linked
breech.
In 1850, Sharps moved to Mill Creek, Pennsylvania, near
Philadelphia, and contracted with the firm of A. S. Nippes to
manufacture two of his sporting rifle designs, which became known
as the Model 1849 and Model 1850. Faced with difficulty in
obtaining financing for further ventures, Sharps left the
Philadelphia area in 1851 and relocated to Hartford, Connecticut,
where he formed the Sharps Rifle Manufacturing Company.
Lacking production facilities, he contracted with the Windsor,
Vermont firm of Robbins & Lawrence to manufacture his new
breechloader. This venture continued until 1855. Among the
Sharps-designed firearms manufactured under this association were
the Model 1851 "Box Lock" Carbine, which featured the Maynard tape
primer system, and the Model 1852 and Model 1853 "Slanting Breech"
Carbines, which were equipped with the Sharps-patented pellet
primer system as an integral part of its breech mechanism.
Model 1853 Carbines were nicknamed "Beecher's Bibles," after noted
New York clergyman and abolitionist Henry Ward Beecher.
Approximately 900 of these arms were shipped in heavy crates marked
BIBLES for use by anti-slavery "Free Soil" settlers who were
fighting against pro-slavery forces in "Bleeding Kansas" during the
1850s. One of the most famous Free Soilers was John Brown, who
later used 300 Model 1853 Carbines in his ill-fated attempt to
capture the U.S. Armory at Harpers Ferry, Virginia in 1859.
Christian Sharps served as technical advisor to the Sharps Rifle
Manufacturing Company, receiving royalties on the manufacture of
their firearms. His relationship with the company was a rocky one,
and in 1853, Sharps severed all connections with the firm. There is
no evidence that he ever had any further association with the
company that continued to bear his name.
In 1855, the Sharps company introduced the Model 1855 Carbine.
These arms retained the slanting breech and buttstock patch boxes
of earlier models, but featured the Maynard tape primer system.
Approximately 800 .54 caliber carbines were manufactured for the
U.S. government, and an additional 6,000 Model 1855s in .577
caliber were purchased by Great Britain.
While these carbines were in production, both Robbins &
Lawrence and Sharps suffered serious financial losses. The latter
corporation went bankrupt, and their operations were taken over by
Sharps and moved to Hartford.
The Sharps New Model 1859, introduced in that year, was available
as a carbine, and in round-barrel military rifle or
octagonal-barrel sporting rifle versions. Its straight-breech
design is credited to Richard S. Lawrence, formerly of Robbins
& Lawrence, who had become the superintendent of the Sharps
Rifle Company. This design, in conjunction with a
breechblock-mounted plate capable of slight rearward movement when
under pressure, created a moderately effective gas seal.
New Model 1859 arms also employed an improved version of the
Sharps pellet primer system which allowed the pellet feed mechanism
to be disengaged. Ordinary percussion caps could then be used, with
the supply of pellet primers held in reserve. Like earlier Sharps
designs, the Model 1859 fired a glazed linen combustible .52
caliber cartridge. When closed, the breechblock sheared off the
rear of the cartridge, exposing the propellant.
During the Civil War, the Federal government bought over 80,000
Sharps carbines and nearly 10,000 Sharps Rifles. These arms were
highly regarded by the troops who used them. Sharps Carbines found
favor with Federal cavalry troopers, and New Model 1859 Rifles were
used with great success by famous infantry units such as Colonel
Hiram Berdan's U.S. Sharp Shooters, perhaps the first specialty
troops in the history of modern warfare, as well as the 5th New
York (Duryea's Zouaves) and the 13th Pennsylvania Reserves
(Bucktails). Even the Confederate government recognized the
superiority of the New Model 1859 Carbine, contracting with the
Richmond firm of S.C. Robinson for the production of 5,000
copies.
The New Model 1859 was followed by the New Model 1863 and New
Model 1865 Carbines and Rifles. These were nearly identical to the
New Model 1859, differing primarily in barrel stampings, the
omission of buttstock patchboxes, and in the design or absence of
bayonet lugs. Many versions of all three arms were later converted
for use with .50-70 and .52-70 caliber metallic cartridge
ammunition in the years following the Civil War. The New Model 1869
Carbine and Rifle, available in .44-77, .50-70, and .60 calibers,
were the first Sharps arms designed for use with metallic
cartridges.
In 1874, the firm was reorganized as the Sharps Rifle Co., with
operations remaining in Hartford. In 1876, manufacturing was moved
to Bridgeport, Connecticut, where it remained until 1881. This
period saw the manufacture of some of the more notable of Sharps
longarms, beginning with introduction of the Model 1874 Rifle.
Nicknamed "Old Reliable," this arm, available in a variety of
calibers, barrel lengths, sights, and other features, became a
favorite with both Plains buffalo hunters and competition shooters.
Many Fancy-Grade models featured engraving which ranged from simple
scrollwork to elaborate hunting or western scenes on their
surfaces.
The Sharps Model 1877 shared in the popularity of its predecessor.
These deluxe-grade heavy-barreled .45 caliber rifles were designed
specifically for Creedmoor and other long-range target shooters.
Only 100 of these were produced, and they are as sought-after today
by collectors as they were by competitors at the time of their
introduction.
The last rifle to be produced by the Sharps Rifle Company was the
Model 1878 Sharps-Borchardt Rifle. This arm was developed by Hugo
Borchardt, who later became famous for his automatic pistol
designs. These rifles, with their flat-sided frame and hammerless
appearance, differ notably from earlier Sharps designs. Like the
Model 1874, the Sharps-Borchardt was available in a variety of
stocks, barrel lengths and weights, sights, calibers, and other
features, including deluxe grade models. These popular rifles were
produced until 1881, when the Sharps Rifle Company went bankrupt
and ceased operations.
Although his association with the Sharps Rifle Manufacturing
Company ended in 1853, Christian Sharps continued to work as a
designer and manufacturer of firearms. He returned to Philadelphia
and formed C. Sharps & Co., a manufacturer of percussion
revolvers, breechloading single-shot pistols and pistol-rifles, and
four-shot pepperbox pistols.
In 1862, Sharps entered into a partnership with William Hankins.
Their new company, known as Sharps & Hankins, continued to
produce pepperbox pistols, as well as the single-shot .52 caliber
Model 1861 Navy Rifle and the Model 1862 Carbine, both of which
featured sliding breech actions. The partnership was dissolved in
1866, and Sharps reverted to the C. Sharps & Co. name. This
firm ceased operations in 1874 with the death of Christian Sharps
on March 12 of that year.